International Interline is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a. Interline Back to Engine Room/Bilge Paint. international_paint_tin free, heavy duty epoxy tank lining. Packaging: 20L. Documents. interline__eng. professional vessel coating / for ships / two-component / epoxy. Interline P International Marine. Add to MyNauticExpo favorites. professional vessel coating .
|Published (Last):||27 August 2014|
|PDF File Size:||17.92 Mb|
|ePub File Size:||8.13 Mb|
|Price:||Free* [*Free Regsitration Required]|
Take precautions to avoid skin and eye contact overalls, gloves, goggles, masks, barrier cream, etc. It is the user’s responsibility to check with their local representative that this inyerline sheet is current prior to using the product. The content of this website is our best recommendation and is not advice. This product is no longer in stock.
International Interline is a two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of interlije including crude oil, white oils and potable water. After the last coat has cured hard, the coating system dry film thickness should be measured using a suitable non-destructive intelrine gauge to verify the average total applied system thickness.
Subject to re-inspection thereafter. It is good working practice to periodically flush out spray equipment during the course of the working day. Ijterline the event that welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
LORD Corporation manufacturing company is raising prices based on changing market conditions. This product contains liquid epoxies and modified polyamines and may cause skin sensitisation if not used correctly. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
AkzoNobeI’s Interline 975P provides a Solvent-Free Solution
A sharp angular surface profile of microns mils is recommended. The lab, located in Krefeld, Germany, will be used to operate and conduct application developme…. Where necessary, remove weld spatter and smooth weld seams and sharp edges. Consult International Protective Interlinf for specific advice regarding tank lining applications.
Interline® – Protective Coatings | International Paint
Sika agreed to acquire Arcon Membrane Srl, a manufacturer of roofing and waterproofing systems in Intsrline. However, it is suitable for application over the following primer: All products supplied and technical advice given are subject to our Conditions of Sale. The relative humidity within the confines of the tank should be controlled using dehumidification equipment.
Surface defects revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner.
Typical Coverage per coat 2. If you do not fully understand these warnings and instructions or if you cannot strictly comply with them, do not use the product and consult International Protective Coatings.
Cargo Resistance Guide Notes. International Interline Reference: The repaired areas shall be retested and allowed to cure as specified before placing the finished lining into service.
Where such equipment is not available, a single coat application technique should be employed to avoid intercoat adhesion problems. While LORD actively works to control expenses and absorb cost fluctuations, significant increases in raw materials, feedstocks, logistics and transportatio…. All work involving intelrine application and use of this product should be performed in compliance with all relevant national Health, Safety interlie Environmental standards, regulations and legislation.
International International Interline is imterline two component, solvent free, heavy duty epoxy tank lining for application to steel tank internals to provide corrosion resistance to a range of products including crude oil, white oils and potable water. Application by other methods, e. The climatic conditions within the tank must be controlled as recommended in the Interline Application Guidelines. Low trade prices Our best trade prices on everything!
Alternatively, the blast standard can be maintained by use of dehumidification. Solvent free, high build, amine cured epoxy tank lining Certified to BS This educational event includes the Interlie Coating Wo…. Where multi-coat systems are to be used, optimum intercoat adhesion is best achieved by keeping the overcoating interval as short as possible.
Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. Always mix a complete unit in the proportions supplied. Rect Bottom Important Note The information in this data sheet interlibe not intended to be exhaustive; any person using the product for any purpose other than that specifically recommended in this data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at their own risk.
The cured film should be essentially free of runs, sags, drips, inclusions or other defects. Martorana has more than 26 years of leadership experience in the process equipment manufacturing industry and demonstrates a keen acumen for domestic and overseas market dy…. All deficiencies and defects should be corrected.
Jnterline does not take into consideration any specific curing requirements for third party approvals, such as for potable water use. Iterline pitted areas should be stripe coated by brush, to ensure good “wetting” of the surface. VOC values are typical and are provided for guidance purpose only.
This product has the following specification approvals: Once units of paint have been mixed they should not be 9775 and it is advised that after prolonged stoppages work recommences with freshly interlime units.
I would like to hear about offers and services: This Technical Data Sheet is available on our website at www. Proper ventilation must be provided during application and afterwards during curing refer to product datasheets for typical curing times to ensure safe limits and prevent fires and explosions.